Modular System – Extension Board Based
- The system is designed to allow you to extend the capacity by simply adding extension boards onto it. This gives you the cost advantage when you are implementing minor capacity upgrades. Moreover, the extension board based design provides a consistent architecture in the system and thus promotes better maintenance quality by reducing the system learning time.
Centralised connection
- The cables are terminated in the controller. This allows faster data processing as transfer of data are all done onboard and the readers are directly connected to the controller.
- Centralised connection also promotes better deployment and maintenance quality. The engineers can perform the inspection and service all at one place and this can help to reduce the cost of maintenance operations.
Configurable to Distributed Architecture
- Where remote interfacing of door / reader or I/O are required, the controller supports these remote interfacing modules (RIM) that connect to the controller using RS485.
- This is a flexible and powerful controller capability that gives you the benefit of both useful centralized and distributed architecture in one box.
Support Door, Lift, Alarm Monitoring
- The controller has been built for high end integrated security applications. It can support door access control, car park access control, lift access control and alarm monitoring.
- You can configure the capacity of the system by adding extension boards or remote interfacing modules.
32 bit ARM Processor
- The controller uses the 32bit ARM RISC processor at 72MHz. This is a powerful processor for industrial applications and it enables the system to process the complex applications in real-time manner.
Onboard IP with Encryption
- The controller is equipped with LAN connectivity at 10/100Base-T using TCP/IP protocol.
- It supports push based communication to computer for faster data transfer speed.
- The IP communication is encrypted using industrial standard AES128 for secured communication.
Remote Firmware Download
- Firmware can be downloaded from the application software via the IP interface.
- This helps to improve the maintainability of the controller at site. You can update or upgrade the firmware from the computer at site without needing to open the controller box or bring the controller back for service.
| No | Item | Features |
| 1. | Max Door | 5 |
| 2. | Relay Output | 8 (5 for Door Relay + 3 General Purpose) Relay Rating: 1A |
| 3. | Sensor Input | 16 Supervised (As Door Status or General Purpose) |
| 4. | IP | Yes. LAN 100 Base T |
| 5. | Reader | • MicroEngine Plato Readers : Max 10 (5 Entry + 5 Exit) • Wiegand / ABA Readers : Max 5 |
| 6. | Comm Port | Yes. • RS485 to Remote Interface Module • RS485 to Extension Boards |
| 7. | Card Number Length | Up to 16 Digits |
| 8. | Max Card DB | 25,000 / 50,000 / 100,000* |
| 9. | Max Transaction DB | 100,000 / 100,000 / 200,000* |
| 10. | Time Zone | 255 |
| 11. | Time Set | 255 |
| 12. | Floor Zone | 255 |
| 13. | Global Antipassback | Yes |
| 14. | Interlocking | Yes |
| 15. | Access Mode | 1. Card + Pin 2. Card Only 3. Pin Only 4. Facility Code 5. Fingerprint Only 6. Card + Fingerprint 7. Pin + Fingerprint 8. Automatic Lock Release 9. Inhibit Access |
| 16. | IP Messaging Encryption | Yes. AES128. |
| 17. | Alarm Monitoring Support | Yes |
| 18. | Extension | Up to 3 Extension Board : SNet-E5D : 5 Door Extension Board SNet-E32R : 32 Relay Output Board SNet-E248S : 24 Supervised Input & 8 Relay Output Board Max Extension Capacity : 5 Doors / 128 Inputs / 128 Outputs |
| 19. | Support Remote Interface Module | Yes. Use RS485. Door Interface Unit (Max 10) : MK801 Reader Interface I/O Controller (Max 10) : MiO-S168 – 16 Supervised Inputs / 8 Outputs MiO–R16 – 16 Relay Outputs MiO-L32 – 32 LED Driver for Mimic Panel Use Max Remote Capacity : 10 Doors / 160 Inputs / 160 Outputs |
| 20. | Processor | ARM RISC Processor at 72MHz |
| 21. | Power Requirement | 12V @ 500mA (Base Board Only) |
| 22. | Onboard LED / Buzzer | Yes |
| 23. | Remote Firmware Update | Yes. Can be done through application software at site. |
| 24. | Controller Package PSU | 12VDC @ 5A with 12AH Battery |
* Depending on Model
SNet-E5D – 5 Door Extension Board
– Add another 5 door support to the controller system, becomes a 10 door controller
| No | Item | Features |
| 1. | Max Door | 5 |
| 2. | Relay Output | 8 (5 for Door Relay + 3 General Purpose) Relay Rating : 1A |
| 3. | Sensor Input | 16 |
| 4. | On Board Surge Suppressor | Yes |
| 5. | Power Requirement | 12V @ 5A |
| 6. | Communication to Base Board | RS485 |
| 7. | LED Indicator | Yes |
SNet-E32R – 32 Relay Output Extension Board
– Add support for lift access control and alarm output system
| No | Item | Features |
| 1. | Relay Output | 32 Relay Rating : 1A |
| 2. | On board Surge Suppressor | Yes |
| 3. | Power Requirement | 12V @ 2A |
| 4. | Communication to Base Board | RS485 |
| 5. | LED Indicator | Yes |
SNet-E248S – 24 Supervised Input & 8 Relay Output Extension Board
– Add support for supervised alarm inputs and Output system
| No | Item | Features |
| 1. | Supervised Inputs | 24 Able to detect line being bypassed, cut or triggered |
| 2. | Relay Output | 8 Relay Rating : 1A |
| 3. | On board surge suppressor | Yes |
| 4. | Power Requirement | 12V @ 2A |
| 5. | Communication to Base Board | RS485 |
| 6. | LED Indicator | Yes |
Door Interface Unit
MK801
– Add remote door interfacing capacity
| No | Item | Features |
| 1. | Comm Port | 2 RS485 1 to Controller 1 to MicroEngine readers |
| 2. | Relay Output | 1 (Relay Rating : 1A) |
| 3. | Readers | 2 (1 Entry / 1 Exit) Onboard RS485 Port for Connecting to MicroEngine Readers & Wiegand / ABA Port for Connecting to 3rd Party Readers |
| 4. | On Board Surge Suppressor | Yes |
| 5. | LED Indicator | Yes |
| 6. | Power Requirement | 12V @ 0.5A |
I/O Controller
MiO-L32
– Add remote support for LED drivers for mimic panel applications
| No | Item | Features |
| 1. | Comm Port | 1 RS485 (to Controller) |
| 2. | LED Driver Outputs | 32 (20 mA) |
| 3. | Digital Input | 2 (for Interfacing with Key-Switches) |
| 4. | On Board Surge Suppressor | Yes |
| 5. | LED Indicator | Yes |
| 6. | Power Requirement | 12V @ 0.5A |
MiO-S168
– Add remote support for supervised inputs and relay outputs
| No | Item | Features |
| 1. | Comm Port | 1 RS485 (to Controller) |
| 2. | Supervised Inputs | 16 Able to Detect Line being Bypassed, Cut or Triggered |
| 3. | Relay Output | 8 (Relay Rating : 1A) |
| 4. | On Board Surge Suppressor | Yes |
| 5. | LED Indicator | Yes |
| 6. | Power Requirement | 12V @ 0.5A |
MiO-R16
– Add remote support for relay outputs, can be used for lift access applications
| No | Item | Features |
| 1. | Comm Port | 1 RS485 (to Controller) |
| 2. | Relay Output | 16 (Relay Rating : 1A) |
| 3. | On Board Surge Suppressor | Yes |
| 4. | LED Indicator | Yes |
| 5. | Power Requirement | 12V @ 0.5A |
xPortalNet Security Management Software System
| No | Item | Features |
| 1. | Client Server | Yes. Up to 20 Clients. |
| 2. | System | Door Access/Lift Access/Car Park/Alarm Monitoring/Guard Tour |
| 3. | Card Holder | 200,000 (16 digits) |
| 4. | No. of Door / Readers | 1024 Doors / 2048 Readers |
| 5. | No. of Inputs / Outputs | 024 Inputs / 1024 Outputs |
| 6. | Time Set / Time Zone | 1024 |
| 7. | System Users | Unlimited |
| 8. | Software Access Control | Yes. User Configurable Command Level Access Control. |
| 9. | Floor Plan System | Yes. Dynamic & with Camera Icon. |
| 10. | Database Supported | MS SQL Server / Oracle |
| 11. | OS | • Windows XP / Vista / 7 Professional (32/64 bits) • Windows Server 2003 / 2005 / 2008 (32/64 bits) |
| 12. | Microsoft .Net | Yes |
| 13. | Communication Supported | LAN / RS485 |
| 14. | Controller Supported | • XP-SNet – IP 5/10 Door with Alarm Monitoring Flexible Architecture Controller • XP-M1000i – IP 1 Door Controller • XP-M2000i – IP 2 Door Controller • XP-P1000i – IP PoE Single Door Controller • GTR1200L – IP Single Door Card Reader Controller • GT3200L – IP Single Door Fingerprint + Card Reader Controller • M1000X – Single Door Card Reader Controller |
| 15. | Time Attendance | Yes. Non-Overnight |
| 16. | Real Time Export | Yes. User Configurable. |
| 17. | Model | xPortalNet Lite, xPortal Standard, xPortalNet Pro, xPortalNet IS |
| 18. | Web Based | User xPortalWEB with full web based UI and online monitoring screen |
SNet – GAC – Live Global Antipassback
– Add support Global Antipassback by cluster
| No | Item | Features |
| 1. | Connectivity to Controller | TCP / IP (Max 128 doors per cluster) |
| 2. | Real Time Location Update | Yes. GAC as centralized look up device with immediate location info update. Readers at other doors immediately obtained the latest location info of the card user. No waiting time required for data synchronization between controller |
| 3. | Power Requirement | 12V @ 2A |
SNet – LID – Lift Interfacing Device
– Add support for High Level Interfacing to Selected Lift Brand
| No | Item | Features |
| 1. | Communication to Lift Controller | By TCP / IP |
| 2. | Default / Auto Floor | Yes |
| 3. | Manual Floor | Yes |
| 4. | Multi Lift Controller | Up to 4 |
| 5. | Power Requirement | 12V @ 2A |
| No | Item | Features |
| 1. | XP-GT3200L | Fingerprint Proximity Reader with LCD & Keypad Built-in Controller Function, 3,200 Users, 20,000 Transactions, TimeKeeping C/W MAS-RBT Door Interface Unit |
| 2. | XP-GT3200ABL | Fingerprint ISO14443 A/B Serial No. Reader with LCD & Keypad Built-in Controller Function, 3,200 Users, 20,000 Transactions, TimeKeeping C/W MAS-RBT Door Interface Unit |
| 3. | XP-M1000X | Proximity Reader with LCD & Keypad Built-in Controller Function, 1,000 Card Users, 10,000 Transactions, Time Keeping C/W MAS-RBU Door Interface Unit |
| 4. | XP-GTR1200L | Proximity Reader with LCD & Touch Sense Keypad + LAN 1,200 Card Users, 10,000 Transactions |
| 5. | XP-M1000ABX | ISO14443 A/B Serial No. Reader with LCD & Keypad Built-in Controller Function, 1,000 Users, 20,000 Transactions, TimeKeeping C/W MAS-RBU Door Interface Unit |
| 6. | XP-RDPRX | Proximity Reader |
| 7. | XP-RDMFX | ISO14443 A/B Serial No. Reader with ABS Casing |
| 8. | MiO-44 | 4 In 4 Out Card |
| 9. | MCI-XPC3000/S | Standalone Software for Controlling Up to 64 Doors of XP-M1000X, XP-GT3200L, XP-GTR1200L, XP-CPRO Controller |
| 10. | MCI-XPC3000 | xPortal3000 Client / Server Software LicenceUnit Max 3 Client Max 128 Doors Max 64 Controller per Software |
| 11. | XPC3000-CLIENT | xPortal3000 Client/ Server Software Workstation Licence |
| 12. | MPS-320 | 3A Power Supply Unit with Low Power Cut-off |
| 13. | MPC-100 | Proximity Card |
| 14. | MPC-S1K | Mifare Standard 1KBit ISO Card |
| 15. | XP-M1000i | Encrypted IP 1 Door Access Controller |
| 16. | XP-M2000i | Encrypted IP 2 Door Access Controller |
| 17. | Plato-P80S | Proximity Reader |
| 18. | Plato-P80KS | Proximity Reader with Touch Sense Keypad |
| 19. | Plato-P80KL | Proximity Reader with Touch Sense Keypad & Colour LCD |
| 20. | Plato-C80S | Mifare / CEPAS Reader |
| 21. | Plato-C80KS | Mifare / CEPAS Reader with Touch Sense Keypad |
| 22. | Plato-C80KLS | Mifare / CEPAS Reader with Touch Sense Keypad & Colour LCD |
| No | Documentation |
| 1. |  Product Brochure: XP-SNet |
3. Troubleshooting Guide
- Floor accessibility does not work, user can still access all floor even have no access, see article ID: AA-00340.
- Problem to set the address number for reader and controller, see article ID: AA-00332.
- What is the default IP address for the XP-SNET controller, see article ID: AA-00336.
- Problem to set the controller’s IP Address after login to Web Diagnostic, see article ID: AA-00302.
Đánh giá
Chưa có đánh giá nào.