NOTE: The AT-OME-RX11 receiver has replaced the AT-UHD-EX-100CE-RX-PSE in a previous version of this extender kit. It offers the same features, with the addition of audio de-embedding capability
HDBaseT TX/RX for HDMI and USB-C®
The Atlona AT-OME-ST31A-KIT is an HDBaseT transmitter and receiver combination that delivers a complete integration solution with 4K video extension, automatic switching for the HDMI and USB-C inputs, and automatic display control. It includes the Omega™ Series AT-OME-ST31A three-input HDBaseT switcher and AT-OME-RX11 HDBaseT receiver. The OME-ST31A features audio de-embedding, mirrored HDMI and HDBaseT outputs, and selectable 4K downscaling to 1080p for the HDMI output. The OME-RX11 features a compact, low-profile enclosure that can easily be concealed behind a wall-mounted display or above a projector. This HDBaseT extender solution extends AV, Ethernet, and control up to 330 feet (100 meters) over category cable. Audio de–embedding is available at the transmitter and receiver
The transmitter is remotely powered by the receiver over HDBaseT. This makes the OME-ST31A-KIT ideal for applications in which the transmitter needs to be installed under a meeting table or in a lectern where local AC power may not be available.
FEATURES
3×1 HDBaseT switcher with HDMI and USB-C inputs
- USB-C and two HDMI inputs
- Immediate compatibility with laptops and tablets with USB-C ports supporting AV*
- No need to provide USB-C to HDMI adapters
- * USB-C port supports AV and device charging (with optional AT-PS-245-D4 power supply), but not USB data.
Video, audio, power, and data over category cable utilizing HDBaseT technology
- Extends up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable
- Uses easy-to-integrate category cable for low-cost, reliable system installation
4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
- Compatible with sources up to 4K/60 4:2:0 and 4K/30 4:4:4
- Supports HDMI data rates up to 10 Gbps from PCs, media players, and Ultra HD Blu-ray players
- HDMI and USB-C inputs, and HDMI output on the transmitter are compatible with 4K/60 4:4:4 and 4K HDR
HDCP 2.2 compliant
- Adheres to latest specification for High-bandwidth Digital Content Protection
- Allows protected content stream to pass between authenticated devices
Mirrored HDMI output at transmitter with selectable 4K to 1080p downscaling
- Integrated video processing available on the HDMI output for automatic 4K/UHD @ 60, 30, or 24 Hz down-conversion to 1080p (based on connected display EDID). The downscaling can be bypassed for pass-through up to 4K/60 4:4:4 and 4K HDR.
- Ideal for applications with a mix of 1080p and UHD sink devices, and when a 1080p confidence monitor is used in conjunction with 4K/UHD presentations
Transmitter powered by receiver over HDBaseT
- Industry standard IEEE 802.3af PoE is supplied by the receiver over HDBaseT
- Allows convenient under-table or furniture installation without the need for local AC power
- Transmitter can also be locally powered by the optional AT-PS-245-D4 power supply – to charge a USB-C mobile device
Automatic display control
- Automatically changes display power state based on active or standby mode of the switcher. Control signals to display are transmitted via IP, RS-232, or CEC.
- Enables display and volume control. CEC enables control of consumer displays (as supported by the display manufacturer).
- Includes an adjustable lamp cooldown mode to avoid prematurely powering up a projector after shutdown
- Eliminates the need for a complex AV control system
Automatic input selection using hot plug detect and video detection technology
- Selects active input when sources are connected or if there is a change in source power status
- Enables simplified, automatic system operation without user intervention
Audio de-embedding at transmitter and receiver
- De-embeds two channel PCM audio to a balanced, analog audio output
- Deliver audio to an amplifier and speakers for sound reinforcement
Multi-channel audio compliant
- Passes through multi-channel audio formats from the HDMI or USB-C inputs
- Supports PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS®Digital Surround™, DTS-HD Master Audio™, and DTS:X®
EDID management
- Manages EDID communications with the source through a display’s EDID or internally stored EDID
- Ensures desired audio formats and video resolutions are provided to the AV system
HDCP management
- Automatically reports HDCP compliance status to the source based on the sink device
- Allows non-protected material from PCs to pass to non-compliant displays, streaming devices, and teleconference systems; protected content is not transmitted
- Displays a green splash screen as visual confirmation that protected content is being blocked from transmission to a non-compliant display
Integrated HDBaseT link status monitoring
- Tests integrity of the HDBaseT cable link between the transmitter and the receiver
- Web GUI provides real-time link status
- Quick, easy verification or troubleshooting of RJ-45 termination or twisted pair cable quality
Intuitive GUI-based configuration using integrated web server (transmitter)
- Offers menu-based configuration of device settings including network access, input switching, signal processing, display control, HDCP and EDID management, and more
- Allows fast configuration of internal product settings and troubleshooting from a mobile device or PC in the field
TCP/IP and RS-232 control (transmitter)
- Flexible control options for compatibility with Atlona Velocity™ and third-party control systems
- Reduces integration time and costs
Easy to configure and manage with Velocity Device Manager – transmitter
- Centralized, network-based configuration and management of Atlona IP-controllable products and systems
- Manage configuration and firmware updates for AV devices spanning a facility, building, enterprise, or residence
- Available as a free software download, or in complete Velocity control system components
Field-updatable firmware
- Transmitter can be updated in the field via AMS or the web GUI
- USB port on transmitter and receiver for firmware updates
Front panel power and signal status LEDs
- LED indicators provide power, HDBaseT link, and input selection status information
- Provides local, convenient setup and troubleshooting when network access is not available
Low-profile, 1 inch (25 mm) high enclosures
- Easy installation into confined spaces below tables and in furniture, as well as behind displays and above projectors
- Keeps devices out-of-sight when placed in public spaces
Included accessories
- Installation guide
- 2 meter (6.5 foot) USB-C male-to-male cable (USB 3.1 Gen 1)
- Surface mounting hardware
- External universal power supply (for receiver)
Specifications
NOTE: The AT-OME-RX11 receiver has replaced the AT-UHD-EX-100CE-RX-PSE in a previous version of this extender kit. It offers the same features, with the addition of audio de-embedding capability.
Specifications are provided below for both receivers.
Specifications for AT-OME-ST31A-KIT
Jump to: Specifications for AT-OME-RX11
Jump to: Specifications for AT-UHD-EX-100CE-RX-PSE
| Video | |||||||||||
| HDMI Specification | HDMI 2.0(1); HDCP 1.4, 2.2 | ||||||||||
| UHD/HD/SD | 4096×2160 (DCI) @ 60(1)/30/25/24 Hz, 3840×2160 (UHD) @ 60(1)/30/25/24 Hz, 1080p @ 60/59.9/50/30/29.97/25/24/23.98 Hz, 1080i @ 60/59.94/50 Hz, 720p @ 60/59.94/50 Hz, 576p @ 50 Hz, 576i @ 50 Hz, 480p @ 60/59.96 Hz, 480i @ 60 Hz | ||||||||||
| VESA | 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1440×900, 1400×1050, 1280×1024, 1280×800, 1366×768, 1360×768, 1152×864, 1024×768, 800×600, 640×480 | ||||||||||
| Scaler (HDMI Output)(2) | IN | OUT | |||||||||
| 4K @ 24 Hz 4K @ 30 Hz 4K @ 60 Hz, 4:2:0 | 1080p @ 24 Hz 1080p @ 30 Hz 1080p @ 60 Hz (YUV/RGB, 4:4:4) | ||||||||||
| Scaler Pass-Through (HDMI Output) | 4K @ 60 Hz | 4K @ 60 Hz | |||||||||
| USB-C® | Up to 4K/UHD @ 60Hz | ||||||||||
| Color Space | YUV, RGB | ||||||||||
| Chroma Subsampling | 4:4:4, 4:2:2, 4:2:0 | ||||||||||
| Color Depth | 8-bit, 10-bit, 12-bit | ||||||||||
| HDR | HDR10, Hybrid-Log Gamma (HLG), and Dolby® Vision™ @ 60Hz; HDMI and USB-C ports only | ||||||||||
| Audio | |||||||||||
| Pass-Through Formats | PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS® Digital Surround™, DTS-HD Master Audio™, and DTS:X® | ||||||||||
| Sample Rate | 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz | ||||||||||
| Bit Rate | 24 Mbits/s max | ||||||||||
| Analog Audio | |||||||||||
| Format | 2-channel stereo | ||||||||||
| Balanced Output | +4 dBu, nominal gain; +20 dBu headroom | ||||||||||
| Frequency Response | 20 Hz to 20 kHz, ±0.5 dB | ||||||||||
| THD+N | < 0.004% @ 20 Hz to 20 kHz | ||||||||||
| SNR | > 105 dB @ 1 kHz, zero clipping @ 0 dBFS, unweighted | ||||||||||
| Protocols | |||||||||||
| Supported | HTTP, Telnet | ||||||||||
| Addressing | DHCP, static | ||||||||||
| Authentication | IEEE 802.1x: PEAP/MSCHAPv2 or EAP-TLS | ||||||||||
| Control | |||||||||||
| RS-232 | Device control and configuration; supports baud rates from 2400 to 115200 | ||||||||||
| IP | Device control and configuration | ||||||||||
| CEC | Device control and configuration | ||||||||||
| Connectors | |||||||||||
| HDMI IN | 2 – Type A, 19-pin female | ||||||||||
| HDMI OUT | 1 – Type A, 19-pin female | ||||||||||
| USB-C | 1 – USB Type-C v3.1, 24-pin female | ||||||||||
| HDBaseT OUT | 1 – RJ45 | ||||||||||
| LAN | 1 – RJ45, 10/100/1000 Mbps | ||||||||||
| RS-232 | 1 – 3-pin captive screw (bidirectional) | ||||||||||
| AUDIO OUT | 1 – 5-pin captive screw, balanced/unbalanced, 2-channel | ||||||||||
| DC 24V | 1 – 4-pin, locking | ||||||||||
| USB | |||||||||||
| USB-C Device Charging Capability | 60 W @ 20 V / 3 A, 36 W @ 12 V / 3 A, and 15 W @ 5 V / 3 A | ||||||||||
| Controls and Indicators | |||||||||||
| INPUT, DISPLAY | 2 – momentary, tact-type | ||||||||||
| IP MODE, RESET | 2 – momentary, tact-type, recessed | ||||||||||
| PWR indicator | 1 – LED, green | ||||||||||
| LINK indicator | 1 – LED, yellow | ||||||||||
| INPUT indicators: 1,2,3 | 3 – LED, green | ||||||||||
| Resolution / Distance | 4K/UHD – Feet / Meters | 1080p – Feet / Meters | ||
| HDMI IN/OUT | 15 | 5 | 30 | 10 |
| CAT5e | 295 | 90 | 330 | 100 |
| CAT6/6a/7 | 330 | 100 | 330 | 100 |
| Signal | |||||||||||
| Maximum TMDS Clock | 600 MHz (300 MHz over HDBaseT) | ||||||||||
| HDBaseT | 10 Gbps | ||||||||||
| Power | |||||||||||
| Consumption | 101.5 W (with USB charging) 24.2 W (without USB charging) | ||||||||||
| External Power Supply (optional) AT-PS-245-D4 | Input: 110 – 220 V AC, 50/60 Hz Output: 24 V DC, 3 A Safety: FCC, RCM, cULus, CE, RoHS | ||||||||||
| Environmental | |||||||||||
| Operating Temperature | +32 to +113 °F 0 to +45 °C | ||||||||||
| Storage Temerature | -4 to +140 °F -20 to +60 °C | ||||||||||
| Operating Humidity (RH) | 20% to 95%, non-condensing | ||||||||||
| AT-OME-ST31A Dimensions (H x W x D) | Inches | Millimeters |
| Unit | 1.02 x 8.62 x 5.98 | 26 x 219 x 152 |
| Power Supply | 1.6 x 2.6 x 6.2 | 40.6 x 66 x 157.4 |
| Chassis | |||||||||||
| Weight | 1.95 lbs 0.88 kg | ||||||||||
| Safety | CE, FCC, RoHS | ||||||||||
(1)4K/UHD p60 4:4:4 supported on input/output HDMI and USB-C input ports, 4K/UHD p60 4:2:0 is supported on HDBaseT output.
(2)Scaler does not support frame rate conversion.
Specifications for AT-OME-RX11
Jump to: Specifications for AT-OME-ST31A
Jump to: Specifications for AT-UHD-EX-100CE-RX-PSE
| Video | |||||||||||
| HDMI | 2.0 | ||||||||||
| HDCP | 2.2 | ||||||||||
| UHD/HD/SD | 4096×2160@60/50/30/25/24Hz 3840×2160@60/50/30/25/24Hz 1080p@60/59.9/50/30/29.97/25/24/23.98Hz 1080i@30/29.97/25Hz 720p@60/59.94/50Hz | 576p@50Hz 576i@25Hz 480p@60/59.96Hz 480i@30Hz | |||||||||
| VESA | 2560×1600 2048×1536 1920×1200 1680×1050 1600×1200 1440×900 1400×1050 1280×1024 | 1280×800 1366×768 1360×768 1152×864 1024×768 800×600 640×480 | |||||||||
| Color Space | YUV, RGB | ||||||||||
| Chroma Subsampling | 4:4:4, 4:2:2, 4:2:0 | ||||||||||
| Color Depth | 8-bit, 10-bit, 12-bit | ||||||||||
| Audio | |||||||||||
| HDMI Pass-Through Formats | PCM 2.0 LPCM 5.1 LPCM 7.1 | Dolby® Digital Dolby Digital Plus™ Dolby TrueHD Dolby Atmos® | DTS® Digital Surround™ DTS-HD Master Audio™ DTS:X® | ||||||||
| Bit Rate | 24 Mbits/s max | ||||||||||
| Analog Audio | |||||||||||
| Format | Stereo 2-Channel | ||||||||||
| Output level | L: 5.883 Vrms R: 5.855 Vrms | ||||||||||
| Frequency Response | 20 Hz to 20 kHz | ||||||||||
| THD+N | < 0.00009% at 20 Hz to 20 kHz | ||||||||||
| SNR | > 141.49 dB at 1 kHz | ||||||||||
| Sample Rate | 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz | ||||||||||
| Control | |||||||||||
| RS-232 | 2-way device control and monitoring Supported baud rates: 2400, 4800, 9600, 19200, 38400, 57600, 115200 | ||||||||||
| CEC Support | Yes | ||||||||||
| Resolution / Distance | 4K/UHD – Feet / Meters | 1080p – Feet / Meters | ||
| HDMI IN/OUT | 15 | 5 | 30 | 10 |
| CAT5e | 295 | 90 | 330 | 100 |
| CAT6/6a/7 | 330 | 100 | 330 | 100 |
| Connectors, Controls, and Indicators | |||||||||||
| HDBaseT IN | 1 – RJ45, female | ||||||||||
| HDMI OUT | 1 – Type A, 19-pin female | ||||||||||
| AUDIO OUT | 1 – 5-pin captive screw, balanced / unbalanced 2-channel | ||||||||||
| RS-232 | 1 – 3-pin captive screw (bidirectional) | ||||||||||
| LAN | 1 – RJ45, 100Base-T | ||||||||||
| FW | 1 – Mini-USB, 5-pin female | ||||||||||
| DC 24V | 1 – 4-pin, mini-DIN locking connector | ||||||||||
| PWR indicator | 1 – LED, green | ||||||||||
| LINK indicator | 1 – LED, yellow | ||||||||||
| Temperature | Fahrenheit | Celsius |
| Operating | 32 to 122 | 0 to 50 |
| Storage | -4 to 140 | -20 to 60 |
| Humidity (RH) | 20% to 60%, non-condensing | |
| Power | |||||||||||
| Consumption | 15.12 W | ||||||||||
| Supply | Input: 100 – 240 VAC, 50/60 Hz Output: DC 24 V / 2.7 A | ||||||||||
| Dimensions (H x W x D) | Inches | Millimeters |
| Unit | 1.02 x 4.29 x 5.24 | 26 x 109 x 133 |
| Power Supply | 1.26 x 1.93 x 4.69 | 32 x 49 x 119 |
| Weight | Pounds | Kilograms |
| Device | 0.90 | 0.41 |
| Certification | |||||||||||
| Device | CE, FCC | ||||||||||
| Supply | CE, FCC, UL | ||||||||||
Specifications for AT-UHD-EX-100CE-RX-PSE
Jump to: Specifications for AT-OME-ST31A
Jump to: Specifications for AT-OME-RX11
| Resolution | |||||||||||
| Video | 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i | ||||||||||
| VESA | 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480 | ||||||||||
| Colorspace | YCbCr, RGB | ||||||||||
| Chroma Subsampling | 4:4:4, 4:2:2, 4:2:0 | ||||||||||
| Color Depth | 8-bit, 10-bit, 12-bit | ||||||||||
| HDR | 4K HDR10 @ 24Hz, 4:2:0 chroma subsampling, 10-bit color (Source signal delivered from Ultra HD Blu-ray as 4K @ 24Hz 4:2:2. Not compatible with HDR10 @ 60Hz.) | ||||||||||
| Audio | |||||||||||
| Formats | PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X | ||||||||||
| Sample Rate | 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz | ||||||||||
| Bit Rate | up to 24-bit | ||||||||||
| Distance | |||||||||||
| CAT5e/6 @ 4K | up to 70 meters | up to 230 feet | |||||||||
| CAT6a/7 @ 4K | up to 100 meters | up to 328 feet | |||||||||
| CAT5e/6 @ 1080p | up to 100 meters | up to 328 feet | |||||||||
| HDMI IN/OUT @ 4K | up to 5 meters | up to 15 feet | |||||||||
| HDMI IN/OUT @ 1080p | up to 10 meters | up to 30 feet | |||||||||
| Signal | |||||||||||
| Bandwidth | 10.2 Gbps | ||||||||||
| CEC | Pass through | ||||||||||
| HDCP | Supports up to 2.2 | ||||||||||
| Temperature | |||||||||||
| Operating | 0°C to 50°C | 32°F to 122°F | |||||||||
| Storage | -20°C to 60°C | -4°F to 140°F | |||||||||
| Humidity | 20 to 90% non-condensing | ||||||||||
| Power | |||||||||||
| Consumption | 15.2W (when paired with TX) | ||||||||||
| Supply | Input: AC100~240V 50/60Hz Output: DC 48V/0.83A | ||||||||||
| AT-UHD-EX-100CE-RX-PSE Dimensions (H x W x D) | Inches | Millimeters |
| Unit | 0.98 x 4.29 x 5 | 25 x 109 x 127 |
| Power Supply | 1.3 x 2.24 x 5.35 | 33 x 57 x 136 |
| Chassis | |||||||||||
| Weight | 0.86lbs 0.39kg | ||||||||||
| Certification | |||||||||||
| Power Supply | CE, FCC, RoHS, cULus, RCM, CCC | ||||||||||
| Product | CE, FCC | ||||||||||
* 4096×2160@50/60Hz & 3840×2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only
Diagrams
Extender kit with HDMI and USB-C® switching
The AT-OME-ST31A-KIT delivers a complete integration solution with 4K video extension, automatic switching for the USB-C and HDMI inputs, audio de-embedding, and automatic display control. The transmitter is remotely powered by the receiver over HDBaseT.
Also available is the AT-ANC-108D for manual user control of the system.
Đánh giá
Chưa có đánh giá nào.