Loa soundbar mạng dùng cho conference QSC NL-SB42

The Q-SYS NL-SB42 is a network PoE soundbar that delivers clear speech and music reproduction natively to Q-SYS. It features a two-way design that provides wide off-axis response, and is optimized to better handle program content (in addition to voice content). The Q-SYS NL-SB42 supports vertical or horizontal mounting and can be integrated into your space with a single Ethernet cable to reduce overall hardware footprint and lower system cost. As a native Q-SYS Product, you can take advantage of the drag-and-drop integration and simple control capabilities offered by Q-SYS.\n\n\n\n## Features & Benefits\n\n* Native PoE soundbar for Q-SYS\n* 3.5-inch woofer + 0.75-inch tweeter\n* Two-way design provides wider off-axis response optimized for program and voice content\n* Supports vertical and horizontal mounting\n* Powered-over-Ethernet enables power, data, and control over a single cable\n* Programmable RGB light bar\n* Consistent tonal characteristics across the entire NL Series family to let you mix and match form factors\n* Q-SYS integrates loudspeaker voicings (Intrinsic Correction™) to simplify the tuning process\n* Comprehensive management via Q-SYS Designer Software and Q-SYS Reflect Enterprise Manager\n* Includes quick-install wall bracket, with 3 cm of fine adjustment\n\n## Two-way network PoE soundbar:\n\nThe Q-SYS NL-SB42 is a two-way PoE soundbar that features a 4-inch woofer and 0.75-inch tweeter, and supports both horizontal and vertical mounting. The two-way design enables a wide off-axis response, and is primed to better handle program and voice content, making it a great option for any high-value space.\n\n## In Sync with Q-SYS Call Sync:\n\nThe Q-SYS NL-SB42 network soundbar features a fully configurable LED status indicator. This LED can also be controlled automatically by Q-SYS Call Sync, which syncs onboard controls and LED status indicators on select Q-SYS device (NM-T1 microphone, TSC Series Gen 3 touchscreens & NL-SB42 PoE soundbar) keeping the state of all in-room endpoints in sync. Additionally, Q-SYS Call Sync provides mute sync for UC platforms via the Q-SYS HID controller, as well as ringing and hook state for Q-SYS softphone and POTS controller.\n\n\n\n#image\_1522456919 {\nwidth: 100%;\n}\n\n## Mix and Match:\n\nNL Series network loudspeakers are built on the same design principles as the Q-SYS AcousticDesign™ Series, featuring a sleek, unobtrusive design along with the same sonic characteristics that allow integrators to mix-and-match form factors to fit the unique needs of any space.\n\n## Go Easy:\n\nNL Series network loudspeakers are powered-over-Ethernet (PoE), which means native Q-SYS audio data, power and control and are delivered over a single cable, greatly simplifying installation and deployment while reducing rack space requirements.\n\n\n\n## Intrinsic Correction™:\n\nQ-SYS automatically integrates loudspeaker voicings (Intrinsic Correction™) to simplify the tuning process.\n\n## Remote Monitoring and Management:\n\nNL Series network loudspeakers are the first loudspeakers that can be automatically monitored and managed by Q-SYS Reflect Enterprise Manager every step of the way, from the audio source all the way through the loudspeaker driver.\n\n## Designed for Q-SYS:\n\nQ-SYS NL Series PoE loudspeakers are native to Q-SYS, a cloud-manageable audio, video and control platform, built to deliver scalable, flexible AV solutions into the future. Learn more about Q-SYS.\n\n* Meeting Room\n* Meeting Room With Centralized Processing\n\n\n\n#image\_130540637 {\nwidth: 100%;\n}\n\n\n\n#image\_1712909663 {\nwidth: 100%;\n}\n\n| Specifications | NL-SB42 |\n| --- | --- |\n| Loudspeaker type | Network PoE soundbar for Q-SYS |\n| LF transducer | 3.5-in (88.9 mm) paper cone woofer |\n| HF transducer | 0.75-in (19.05 mm) silk dome tweeter |\n| Effective frequency range | 110 Hz – 20 kHz |\n| Rated noise power | 12 W (PoE), 24 W (PoE+) |\n| Rated coverage | 150° horizontal, 160° vertical (1 kHz – 10 kHz) |\n| Directivity factor | 2.7 |\n| Directivity index | 4.2 dB |\n| Maximum continuous SPL | 90 dB (PoE), 93 dB (PoE +) |\n| Maximum peak SPL | 106 dB (PoE), 107 dB (PoE +) |\n| Input connector type | RJ45 |\n| Power requirements | PoE (Type 1 Class 3) or PoE+ (Type 2 Class 4) |\n| Enclosure material | ABS |\n| Grille material | Powder-coated steel |\n| Operating temperature range | 10° to 40° C (50° to 104° F) |\n| Net weight | 3.86 lbs (1.75 kg) |\n| Product dimensions | 20.4 x 3.97 x 2.87 in (518.1 x 101 x 73 mm) |\n| Included accessories | Wall-mounting bracket, rubber feet |\n| Safety agency | UL/IEC 62368-1, CE |