Products / Loa treo tường / CBT 1000E Purpose-Designed Extension for CBT 1000 Line Array Column Speaker CBT 1000 + CBT 1000E System

JBL

CBT 1000E Purpose-Designed Extension for CBT 1000 Line Array Column Speaker CBT 1000 + CBT 1000E System

Product code: CBT 1000 + CBT 1000E System

When connected to a CBT 1000 line array column speaker, the CBT 1000E Extension provides extended bass response, extended pattern control, and increased sound output levels. The combined array system features Constant Beamwidth Technology™, representing a breakthrough in pattern control consistency by utilizing complex analog beamforming and amplitude tapering to achieve superior, consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing typical of passive column speakers.

Request Consultation / Quote 📞 0901 494 450

Detailed Description

Features

Components: Six (6) 165 mm (6.5 in) high-excursion LF drivers (CBT 1000E)
1500 Watt power handling (CBT 1000E)
Built-in purpose-designed crossover network for combining with CBT 1000 (CBT 1000E)
Coupler plate included (CBT 1000E)
Extended pattern control
Components: Twenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters and Twelve (12) 165 mm (6.5 in) high-excursion LF drivers (CBT 1000 + CBT 1000E)
3000 Watt power handling (CBT 1000 + CBT 1000E)
Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.
Vertical pattern coverage is individually adjustable through a range of four (4) "Pattern Up" angles and four (4) "Pattern Down" coverage angles for a total of sixteen (16) different coverage combinations, all without the use of external DSP processing (CBT 1000)
Patent-pending Tapered Horizontal Waveguide provides a continuously varying horizontal dispersion (very wide for short-throw, narrower for long-throw) delivering superior coverage in both the front and rear corners of a room (CBT 1000)
Single-speaker system room coverage at high SPL, with minimal over-splash and strong bass response down to below 38 Hz (CBT 1000 + CBT 1000E)
Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode (CBT 1000)
Swivel (pan)/tilt wall bracket and coupler plate included.

Specifications


Drivers	Twenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters and Twelve (12) 165 mm (6.5 in) high-excursion LF drivers (CBT 1000 + CBT 1000E)
Frequency Range (-10dB)	38 Hz – 20 kHz
Coverage	Vertical (selectable via switch)
Sensitivity	102 dB (at highest sensitivity setting: "Point" pattern up, "Point" pattern down, "Speech" voicing, in free space) 95 dB (at lowest sensitivity setting: "Medium" pattern up, "Downfill" pattern down, "Music" voicing in free space)
Impedance	4 ohms
Power Rating	3000 W (12000 W peak), 2 hrs 2000 W (8000 W peak), 100 hrs
Maximum SPL (1m)	Highest directivity setting: ("Point" pattern up, "Point" pattern down) with "Speech" voicing: 131 dB continuous average pink noise 134 dB continuous program 137 dB Peak Highest directivity setting: ("Point" pattern up, "Point" pattern down) with "Music" voicing: 127 dB continuous average pink noise 130 dB continuous program 133 dB peak Lowest directivity setting: ("Medium" pattern up, "Downfill" pattern down) with "Speech" voicing: 128 dB continuous average pink noise 131 dB continuous program 134 dB peak Lowest directivity setting: ("Medium" pattern up, "Downfill" pattern down) with "Music" voicing: 124
Coverage Angle	Vertical: Separate four top and four bottom selections, Horizontal: tapered 100° to 160°
Low Frequency Drivers	12 pcs, 165 mm (6.5 in) drivers, neodymium, 50 mm (2 in) voice coil, damped blended textile surround, coated diaphragm for moisture, UV, and salt resistance.
High Frequency Drivers	24 pcs, 25 mm (1 in) drivers, neodymium, encased magnet and coated diaphragm for moisture, UV, and salt resistance.
Enclosure	Fiberglass reinforced ABS cabinet, powder coated 1050 aluminum grille
Outdoor Capability	IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. Exceeds Mil Spec 810 for humidity, temperature & UV, ASTM G85 for acid-air/salt-spray (200 hrs).
Color	Black (RAL9004) or White (-WH) (RAL9016)
Insert Points	Coupler plate utilizes the bottom two rows of the top speaker and the top two rows of the bottom speaker, leaving available: 20 individual M8 inserts on back panel (20 mm deep) for use with swivel (pan)/tilt bracket(s), plus 4 individual M8 inserts on top and 4 on bottom of cabinet end-caps.
Mounting	Included two-part swivel (pan)/tilt wall bracket provides continuously variable +/- 45 degree left-right swivel aiming (at no up/down tilt – see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously variable +/- 5.25 degree tilt, in the following increments: 5.25°, 5.0°, 4.5°, 4°, 3.75°, 3.5°, 3.0°, 2.75°, 2.5°, 2.0°, 1.75°, and 1.25°. Twenty (20) available threaded mounting points located on back panel of cabinet conform to industry standard rectangular 127 x 70 mm (5.0 x 2.75 in) pattern for legacy OmniMount® and other compatible third-party brackets. Four (4) threaded mount points on the top end-cap and four (4) on the bottom end-cap. Threaded mounting points can be utilized for suspension. (Always use multiple mounting points.)
Dimensions (H x W x D)	2040 mm x 250 mm x 345 mm (80.4 x 9.9 x 13.6 in)
Net Weight	(cabinet): 47.2 kg (104 lbs)
Included Accessories	Two-piece swivel (pan)/tilt wall bracket Coupler Plate
Optional Accessories	MTC-PC2 terminal panel cover CBT1K-ACC1 Accessory kit includes: * 2 pcs MTC-CBT-FM3 flush-mount brackets * 1 pc MTC-CBT-OS3 offset bracket (for CBT 1000+1000E array – works in conjunction with CBT 1000E's included * Coupler Plate for locating CBT 1000E extension cabinet above CBT 1000 instead of below it) MTC-CBT-SUS3 CBT Series suspension bracket kit (2 pcs included to provide top and bottom attachment points)