Bộ mở rộng audio gắn tường qua mạng QSC Wall-Mount Network Audio unD6IO

The Attero Tech unD6IO is a cost-effective, multi-IO Dante network audio wallplate, featuring XLR, RCA and 3.5 mm inputs along with one 3.5 mm and two balanced outputs in a dual-gang form factor. The unD6IO is PoE enabled, delivering all connectivity (power, control and audio data) with a single CAT-5e/6 cable. The size and I/O density of the unD6IO make it easy to put Dante connectivity wherever it is needed – near the audio source or sink – thereby eliminating costly and interference-prone analog wiring.\n\n## Features & Benefits\n\n* 2 x balanced XLR mic/line inputs, 2 x RCA and 1 x 3.5 mm input\n* 1 x 3.5 mm output and 2x balanced outputs on a side-mounted depluggable connector, with software-controllable volume\n* Q-SYS Extension allows for drag-and-drop integration into your Q-SYS design\n* PoE capable\n* Three software-selectable gain levels are available on the XLR input to accommodate a wide variety of input levels and devices.\n* +48 V phantom power\n* Dante Domain Manager-ready\n\n| | |\n| --- | --- |\n| Audio Inputs | |\n| Input types | 2 x XLR (balanced and RF filtered) 2 x RCA (stereo unbalanced) 1 x 3.5 mm (stereo unbalanced) |\n| Gain | -18 dB, -3 dB, +25 dB and +40 dB, software selectable (Inputs 1/2) |\n| Maximum input levels | +20 dBu @ -18 dB gain, +6 dBu @ – 3 dB gain, -23 dBu @ +25 dB gain -38 dBu @ +40 dB gain (Inputs 1/2) +12 dBu ( Inputs 3/4 A & B) |\n| Phantom power | +48 V (inputs 1 & 2 only) |\n| Audio Outputs | |\n| Output type | Two balanced line level with automatic muting on loss of Dante signal on 6-pin Depluggable Euroblock (Outputs 1/2 B) Two unbalanced line level outputs on stereo 3.5 mm TRS (Outputs 1/2 A) |\n| Attenuation range | -60 dB to 0 dB (software-controlled) |\n| Maximum output levels | +12 dBu at 0 dB attenuation (output 1/2 A) +20 dBu at 0 dB attenuation (output 1/2 B) |\n\n| | |\n| --- | --- |\n| Dante Network | |\n| Physical level | Standard Ethernet |\n| Connector | Single RJ-45 |\n| Cable type | CAT-5e or higher |\n| Supported sample rates | 44.1 kHz, 48 kHz |\n| General | |\n| Power | PoE (802.3af) |\n| Dimensions (HWD) | 4.2 x 3.5 x 2 in (114.3 x 88.9 x 50.8 mm) Decora wall plate (2-gang): 4.87 x 4.94 x 0.08 in (123.7 x 125.48 x 2.03 mm) |\n| Weight | 0.6 lb (.27 kg) |